A good cap gun deserves better than a toy box. The weight, the engraving, the little details on the hammer and grip are all worth looking at.
Whether you've got retro western toys or a shelf of modern cowboy cap guns, a display can go wrong in a few ways. Paint fades. A piece falls off a shelf. Kids reach for something they shouldn't. Or a neighbour sees a realistic revolver through the front window and calls the police.
Here's how to show off your collection and keep it safe. The care advice draws on museum guidance for display, and we've named the sources at the end.
Choose the Right Spot
Where you put the display matters more than what you put it in.
Pick a spot inside the house, in a dry room. Avoid rooms with steam and damp, like bathrooms and laundries, and avoid sheds and garages, which swing between hot and cold. Museum guidance says hot display cases and rooms cause swings in relative humidity, and that damages collections. So don't put a case above a heater, next to a fireplace or against a wall that bakes in the afternoon sun.
An interior wall is usually better than an outside one. It's more stable, and it's less likely to get condensation.
And think about who can see it. A display facing the street, or visible through a window, is a bad idea for realistic cap guns. Put it where only people inside the house will see it. That goes for pieces bought from Cap Guns Australia and for old finds alike.
Keep Sunlight Away
Light is one of the biggest risks for a display, and it's not always obvious.
Museum guidance says ultraviolet light does the most damage to collections, and that both daylight and artificial light give off UV. The metal body of a diecast cap gun isn't sensitive to light. But paint, paper boxes, labels and leather holsters are. So a gun in a sunny window might look fine for a while, while the box next to it fades and the holster dries out.
The simple fix is to keep your display away from windows, or to use curtains, blinds or UV-filtering film on the glass. The Western Australian Museum recommends at least covering windows near display areas with UV-filtering film.
Pick a Display Style
There's no single right way. Here are the main options.
Glass-fronted cabinet. The classic choice. It keeps dust off, stops people touching and can be locked. Put your best pieces at eye level. This is our pick for most collectors, especially if there are kids in the house.
Wall display. Great for showing off a few pieces and saving floor space. Use mounts that carry the weight of the gun properly, and don't hang pieces over heaters or in direct sun. Fix the mounts to the wall studs or use proper wall anchors, because diecast cap guns are heavier than they look.
Shadow box. A framed box suits a small set, such as a revolver, a holster, a badge and the original box. It makes a nice story on a wall.
Open shelf. Easy, but pieces gather dust, and they're easy to knock over or for little hands to grab. If you use one, keep it high and keep the pieces secure.
Mounting Without Damage
A gun hangs on a wall by something touching it, so the details matter.
Support the weight of the gun on the frame, not the barrel tip or the trigger guard. Use soft padding such as felt or cloth where the mount touches the finish, so it doesn't rub or mark. Avoid mounts with sharp edges. And check now and then that the mount is still tight, since screws can work loose over time.
Museum guidance for case materials favours coated solid timber and metal. Raw timber and cheap particleboard are poor choices for the inside of a case, so seal them or line them.
Light It Well
Good lighting makes the metal glow. It's worth doing properly.
Use LED lighting, which museum guidance prefers because it gives off very little UV or heat. Mount lights outside the case, or at a safe distance from the pieces, so heat doesn't build up inside. Put the lights on a timer, or switch them off when nobody's looking, since light damage builds up and can't be undone.
Arrange With a Plan
Group by theme. All your western revolvers together, your pirate pistols together. It looks tidy, and it tells a story.
Leave space between pieces. Crowding makes a display look messy, and it makes it easy to knock something over. Put larger pieces at the back or bottom, smaller ones at the front or top.
Use stands or holsters to show pieces at a good angle. And think about the colours. Dark wood and a plain backdrop make diecast metal stand out. If you have western themed toys like holsters, badges and hats, mix them in as props, since they show the gun in the setting it was made for.
Add Labels
Small labels with the maker, the model and where you found it turn a shelf into a collection. They're handy when you show visitors, and they're useful records if you ever sell or insure. Keep them short and neat, and stick them to the case or backing, never to the gun.
Keep It Safe
A few rules apply to every display.
Unload everything. Never display a loaded cap gun. Keep caps in a separate, cool, dry place, away from the display and out of reach of kids.
Lock the cabinet if children are around. A locked case also helps with storage rules. Queensland expects replicas to be stored securely, such as in a locked cupboard or bag, and Tasmania applies its storage rules to imitation firearms as if they were real.
Think about knocks and bumps, like kids running past. Use museum putty or secure stands for pieces that could topple.
Keep It Legal
Realistic cap guns can be classed as imitation firearms in several states, so check before you build the display. Five of the eight states and territories we ship to want police approval. In NSW there's a collector permit that covers displaying a collection for educational, historic or commemorative purposes. Our permits and licences page has links to each state.
Keep It Fresh
Rotate pieces between display and storage. Museums do this to limit light exposure, and it works at home too. It keeps the display interesting, and it means each piece gets a rest.
Dust gently with a soft dry brush or cloth. Don't spray cleaner into the case.
If you want a piece to hang with, start with one favourite. Find a spot out of the sun, pick a simple mount and give it a month. If you still like it, add a second. A display that grows slowly always looks better than one that's rushed.
General information only. Check your state's rules before displaying realistic cap guns. Sources: Museums Galleries Scotland, "Conservation and lighting"; Western Australian Museum, "Environmental and biological factors"; AMaGA Victoria, "Light and conservation"; our permits page.




